TITLE
    OneScanner for Windows: Using Its SCSI Card with Other Devices
Article ID:
Created:
Modified: 		9962
3/26/92
3/26/92
TOPIC




    The SCSI card bundled with Apple OneScanner for Windows can be used with
    other SCSI devices, such as a hard drive. Note: Apple does not support
    other SCSI configurations, cards, or devices.

    To use the card with a SCSI device other than OneScanner, you need the
    driver software that is available from Adaptec, the card's manufacturer.


DISCUSSION


    Using the SCSI card for other devices can be tricky. Sometimes SCSI IDs
    must be set with a jumper on the card and the software must be reconfigured
    to use another address for the card.

    Similarly, the scanner will theoretically operate with other SCSI cards or
    some built-in SCSI implementations, but different drivers will be required
    -- and Apple will not support other SCSI cards. (Note that this rules out
    all Microchannel-equipped IBM PS/2s as supported configurations.)



Document Information
Product Area: Peripherals
Category: Scanner Hardware
Sub Category: OneScanner for Windows
Keywords:

Copyright © 2000 Apple Computer, Inc. All rights reserved.