Logic Pro 7: Changing the Record Path for DAE Channels 33 and Higher

When using DAE, the Recording Path setting in the Set Audio Record Path window only applies to tracks 1 through 32. If a higher track is record-enabled, a dialog opens, asking you to set another record path for the higher numbered tracks. If you accidentally set it to an undesired location, or you need to change it later, you cannot change the path in the Set Audio Record Path window.

Instead, re-initialize the record path from the Audio Configuration window:

1. Open the window by choosing Audio > Audio Configuration in the Logic Pro main menu.
2. Choose Device > DAE in the Audio Configuration window.
3. Choose Edit > Remove Record Path.

This will re-initialize the record path for all DAE channels. You can then set channels 1 to 32 the usual way by choosing Audio > Set Audio Record Path. To set the record path for channels 33 and higher, just record-enable one of the tracks to open the dialog that lets you set another record path for the higher channels.

This is not an issue when using Core Audio. The Recording Path setting applies to all channels, and can be freely reset.