Logic Pro/Express 7.1: US-2400 control surface detected incorrectly

If you have a Tascam US-2400 connected to your computer, it will be detected incorrectly when Logic initially scans for control surfaces. The Tascam US-2400 should be detected as if it were a Logic/Mackie Control and two Logic/Mackie Control XTs. Instead the unit is detected as if it were a Logic/Mackie Control and two Mackie C4s. Additionally, the fader banks are in the wrong order. As a result, the control surface will not operate properly with Logic.

To resolve this issue, delete the control surfaces that Logic has automatically scanned and manually rescan the US-2400 by doing the following:

1. From the Logic Pro or Logic Express menu, choose Preferences > Control Surfaces > Setup.
2. In the window, delete the icons for any detected control surfaces.
3. From the Setup window's menu bar, choose New > Install. An install window appears.
4. Select Tascam US-2400 in the list.
5. Click the Scan button in the upper left corner of the Install window.