iMac (Mid 2007): External features, ports and connectors

Learn about the external features, ports and connectors on the iMac (Mid 2007) computer. All ports and connectors covered in this document are located on the Input/Output (I/O) panel on the bottom right side on the back of the computer.


Features

Built-in microphone

The internal microphone operates independently from all other audio input ports and is always available. The internal microphone supports recording at bit depths of 16, 20, or 24 bits per sample and at sample rates of 44.1 kHz, 48 kHz, or 96 kHz. Audio recorded from the microphone is presented as a stereo data stream with the same data on both the left and right channels. The microphone gain can be adjusted from -16 dB to +30 dB.

Built-in iSight camera

Video chat using iChat AV over a broadband connection, take pictures using Photo Booth or capture video through iMovie HD. The camera has an indicator light that glows when the iSight camera is in use.

Slot-loading optical disc drive

The SuperDrive can read CD-ROM, photo CD, audio, and DVD discs. It can write to CD-R, CD-RW, DVD±R, DVD±RW, and DVD±R Double-Layer (DL) discs.

Built-in infrared (IR) receiver for Apple Remote

The infrared-based Apple Remote works with the built-in IR receiver for use with Front Row to access DVD Player, iPhoto, iTunes, and QuickTime Player.

I/O ports

Apple Mini-DVI video output port

Using the Apple Mini-DVI video output port, you can mirror video or extend the size of the Mac OS X desktop (extended desktop mode) with a compatible DVI (Digital Visual Interface) display or VGA (Video Graphics Display) or projector using the appropriate Apple Mini-DVI adapter:

Video mirroring allows you to see the same image that is on the iMac (Mid 2007) flat-panel display, on an external monitor, television or projector.

Extended desktop mode allows you to connect an external display and use that area in addition to the built-in display for your desktop.

Ethernet port (10/100/1000 Base-T)

The iMac (Mid 2007) has a built in Ethernet port for 10Base-T/UTP, 100Base-TX and 1000Base-T Gigabit operation. The iMac (Mid 2007) computer can be connected to an Ethernet cable from a cable or DSL modem, hub, switch, or router, or to another Macintosh computer.

The connected device can be either a 10Base-T, 100Base-T or 1000Base-T device; the port automatically detects which type of device is connected. You don't have to use an Ethernet crossover cable to connect to other Ethernet devices.

Five USB (Universal Serial Bus) 2.0 ports

The back of the iMac (Mid 2007) has a total of three USB 2.0-compliant ports. You can connect both USB 2.0- and USB 1.1-compliant devices to these ports. The USB 2.0 ports support both low-speed, full-speed and high-speed data transfers, at up to 1.5 megabits per second (Mbit/s), 12 Mbit/s, and 480 Mbit/s respectively.

The aluminum Apple keyboard contains a USB hub with two high-speed USB 2.0 ports.

All the USB ports use USB Type A connectors, which have four pins each.

Audio line input/optical digital audio input port

Line input

The analog line input operates independently from all other audio input ports and is always available. The line input supports recording at bit depths of 16, 20, or 24 bits per sample and at sample rates of 44.1 kHz, 48 kHz, or 96 kHz. Audio recorded from the line input is presented as a stereo data stream. The line input gain can be adjusted from -16 dB to +30 dB.

During input of a 1 kHz, 1 VRMS (-3 dBFS) sine wave (44.1 kHz input sample rate, 24-bit sample depth, 0.0 dB input gain, no weighting) the audio line input has the following nominal specifications:

Optical digital input

The digital audio input has the following electrical characteristics (nominal specifications), based on input of a 1 kHz sine wave at 0 dBFS input level, 24-bit sample depth, and 44.1 kHz sample rate (unless otherwise specified below):

Sound output/digital audio output port

Line/Headphone output

The headphone output is automatically selected for audio output if no external S/PDIF optical digital output device is detected. The headphone output supports a stereo data stream at bit depths of 16, 20, or 24 bits per sample and at sample rates of 44.1 kHz, 48 kHz, or 96 kHz. The headphone output volume can be adjusted from 0.0 dB to -64 dB.

During playback of a 1 kHz sine wave at -3 dBFS voltage level, 24-bit sample depth, 44.1 kHz output sample rate, 100 k load (unless otherwise specified) the audio output has the following nominal specifications:

S/PDIF optical digital output

The S/PDIF (Sony/Philips Digital Interface Format) optical digital output is automatically selected when an S/PDIF optical digital output device is detected on the external combination audio port. The S/PDIF optical digital output supports pulse-code modulation (PCM) and Arc Consistency Algorithm #3 (AC-3) audio formats with the following stereo data stream characteristics:

The S/PDIF optical output channel status conforms to International Electrotechnical Commission (IEC) 60958-3 consumer mode digital audio.

During playback of a 1 kHz sine wave (S/PDIF output format at 0 dBFS output level, 44.1 kHz sample rate, 24-bit sample depth, unless otherwise specified) the digital audio output has the following nominal specifications:

One FireWire 400 and one FireWire 800 port

The iMac provides one FireWire 400 port and one FireWire 800 port supported by an Open Host Controller Interface (OHCI) FireWire controller with a FireWire 800 PHY (Physical Layer).

The FireWire 400 port supports Institute of Electrical and Electronics Engineers (IEEE) 1394a with a maximum data rate of 400 Mbps (50 MBps). The FireWire 800 port supports IEEE 1394b with a maximum data rate of 800 Mbps (100 MBps).

The iMac (Mid 2007) supports 7 W for each port, for a total of 14 W.

The iMac (Mid 2007) computer supports Target Disk Mode (TDM).

Published Date: Feb 20, 2012