Follow the instructions in this sheet carefully. Failure to follow these instructions could damage your equipment and void its warranty.
Note: Written and video instructions covering customer-installable parts are available at http://www.info.apple.com/installparts/.
Tools Required
The tool is supplied with the stand.
To install the stand:
1. Save open documents and quit all open applications.
2. Turn the computer off by choosing Shut Down from the Special menu.
3. Unplug all cables.
4. Place a soft towel or cloth on the desk or surface.
5. Turn the computer over onto the cloth.
6. The stand attaches to the locations circled below.
7. Remove the screw located between the computer's feet.
8. Position the stand on top of the screw holes.
9. Note: The stand slides back and forth. To attach the first screw, slide the stand toward the back of the computer.
10. Tighten the first screw.
11. Slide the stand forward to access the two rear screws.
12. Tighten the screw on the left.
13. Tighten the screw on the right.
14. Carefully turn the computer over. The computer now swivels horizontally and vertically.