Xserve RAID, Xserve RAID (SFP): Moving RAID sets

If, for any reason, you need to move one or more created RAID sets from one Xserve RAID to another or from one side of an Xserve RAID to the other, follow these steps to minimize the risk of data loss.

Warning: Only move RAID sets after following these instructions. These steps must be performed on both the source and target RAIDs.

1. Back up the data on the source Xserve RAID.

    

2. Number the drives in each RAID set to ensure the correct positioning when moved to the target RAID.

    

3. Inform any clients that the volumes will be unavailable for a period of time.

    

4. Unmount the volumes from any client computers.

    

5. Power off the Xserve RAIDs.

    

6. Remove the power cables from the back of the Xserve RAIDs (both source and target).

    

7. Move the drives to the new location, making sure the positioning corresponds with the numbers on the drives (see step 2).

    

8. When all drives are transferred, connect the power cord to the target Xserve RAID.

    

9. Power on the Xserve RAID.