If you purchased a Macintosh Performa computer with At Ease already installed, you do not need to go through the installation procedure. If At Ease was installed at the factory, you also may not have received the disks described in this article.
System Requirements
-------------------
At Ease 2.0 runs on Macintosh computers with:
* at least 2MB of RAM (4MB is recommended)
* System software 7.0 or later
* an internal or external hard disk drive
Installation
============
Make sure you have the At Ease 2.0 Install disks, which contain the At Ease program and related files.
Step 1
------
Turn on your Macintosh.
Step 2
------
Insert the At Ease 2.0 Install 1 disk.
Step 3
------
Double-click the Installer icon to begin the installation process. You see a screen that welcomes you to the Installer, and explains the installation process.
Step 4
------
After you have read the welcome screen, click OK. You see a new screen labeled Easy Install. Make sure the disk named for installation is your startup disk. If not, click Switch Disk until you see the name of your startup disk.
Step 5
------
Click the Install button. A status screen shows you the progress of the installation. Whenever the computer needs information from another disk, it ejects the current disk and display a message indicating which disk you should insert next.
Step 6
------
Insert the At Ease 2.0 disks as requested. When installation is complete, you see a message indicating the process was successful.
Step 7
------
Click Restart to quit the Installer program and restart your computer. You are now ready to set up At Ease 2.0 for use.