NOTE: Check the serial number. This fix is only for:
ColorMonitor IIes with S/N less than Y029000
and
IIc ColorMonitors with S/N less than Y048650.
PROBLEM DESCRIPTION: F901 (3.15 amp fuse) on the main logic PCB
of H-Series ColorMonitor IIc and IIes is blown.
CAUSE: A "special" medium blow higher ampere rating fuse needs to
be installed.
CURE: Contact your local support center and ask them to send you an
upgrade fuse kit.
If this cure does not resolve the problem, go to the Tech Procedures
to obtain a General Troubleshooting procedure.