Follow these instructions in the order presented.
Restart with Install Me First CD
--------------------------------
1) Shut down your Macintosh computer.
2) Restart the computer while holding down the
Command-Option-Shift-Delete keys.
3) When you see the blinking question mark, continue holding down the
four keys, and insert the CD into the drive.
The computer should start from the CD, and then you should see the
At Ease menu. If you don't see this menu, repeat these steps.
Run Disk First Aid
------------------
Disk First Aid software can detect and repair problems on a hard disk.
1) Click on the Disk First Aid button.
2) In the window that appears, be sure the startup hard disk is
selected. If it isn't, click the Drive button to select the startup
hard drive.
3) Click on Open and then on Start. Disk First Aid checks your hard
disk for any potential problems. If it finds problems, you should
let the software repair them.
4) Repeat this procedure for each hard disk attached to the system.
5) When you're finished verifying the hard disks, choose Quit from the
File menu to return to the desktop.
If Disk First Aid can't repair a hard disk, you should back up the hard
disk and reinitialize it using the appropriate formatting utility for
that disk. For Apple drives, use Apple HD SC Setup.
Update Hard Disk Drivers
------------------------
If you don't have an Apple hard disk or use third-party software to
format your disk, don't use the Apple HD SC Setup Utility. However,
you should contact your hard drive vendor to verify that your
formatting software is compatible with system software version 7.1.
If you have an Apple hard drive, you should update the drivers with the
version of Apple HD SC Setup that's on the Disk Tools disk, following
these steps:
1) Double-click the HD SC Setup icon to launch it.
2) Click on the Update button.
3) When you're finished, click Quit to return to the Finder.
If HD SC Setup can't update the hard disk driver (indicated by a
"dimmed" Update button), consider these possibilities:
If a third-party utility formatted your hard disk, you should obtain
the latest version of the utility to update your hard disk.
If a version of Apple HD SC Setup more recent than the version on the
Disk Tools disk formatted your hard disk, don't update the hard disk
drivers.
If a System 6 version of Apple HD SC Setup formatted the drive, it
may not have left enough room for the updated driver. You don't have
to update the hard disk drivers. However, if you intend to use file
sharing or have a Macintosh that can use virtual memory, then you
need to back up the disk and reinitialize it with HD SC Setup. This
erases the disk, so be certain you back up the hard disk first.
If the driver is corrupt, the Macintosh doesn't recognize the drive
(that is, the drive doesn't show on the desktop). You may wish to
reinitialize it with HD SC Setup. This erases the disk, so be
certain you back up the hard disk first.
If the driver has been modified with compression or security software
you will not be able to update the driver. Contact the vendor for
additional help.
Check Available Hard Disk Space
-------------------------------
Be sure you have at least 5MB available on the hard disk where you plan
to install the system software. To check hard disk space, follow these
steps:
1) Choose Control Panels from the Apple menu.
2) Double-click the Views control panel to open it.
3) In the Views control panel, check "Show disk info in header."
4) Open your hard disk's window.
The amount of available disk space appears in the upper-right corner of
any open window.
If there's less than 5MB available, you'll need to delete some
unnecessary files by moving them to the Trash. Choose Empty Trash from
the Special menu, and you'll have more disk space available. Or you
can copy files onto floppy disks or other media before moving them to
the Trash.
Disable the System Folder
-------------------------
You disable the System Folder by moving the System and renaming the System Folder.
1) Open your hard disk's icon and locate the System Folder.
2) Open the System Folder and locate the System file.
3) Move the System file into the Preferences folder.
4) Close the System Folder's window and rename the System Folder
"Storage."
5) Close all windows that are open on your desktop.
Install System 7.1
------------------
Install system software version 7.1 following these steps:
1) Double-click on the Install System Software icon located on the
Install Me First CD.
2) When the "Welcome to the Apple Installer" message appears, click
on OK.
3) Be sure the correct disk is selected for the installation procedure
(click on "Switch Disk" if necessary).
4) Click on Install.
The Installer determines the required software and reads it from
the CD.
Verify Problem Resolution
-------------------------
After performing a clean installation, verify that you resolved the
problem before adding anything to the new System Folder. Adding items
to the System Folder before resolving your problem defeats the purpose
of this procedure.
Install Non-Standard Items
--------------------------
You can now reinstall the non-standard items from the old System Folder
(now named "Storage") such as fonts, screen savers, device drivers, and
so on. If possible, you should reinstall these items from their
original disks.
If the original disks aren't available, you may move the non-standard
items from the Storage folder to the new System Folder. Be aware that
reinstalling items from the old Storage folder into the new System
Folder may reintroduce damaged or corrupted files. Be careful not to
replace anything that's already in the new System Folder. Only move
items that aren't already in the new System Folder.
1) Open each corresponding folder within the System Folder and the
Storage folder and then compare the contents.
2) Move anything that isn't already in the new System Folder and its
subfolders from the Storage folder and its subfolders to the new
System Folder.
3) Restart your Macintosh.
Troubleshooting Extension Conflicts
-----------------------------------
If you've installed any system extensions or control panels, you'll
probably see their icons line up across the bottom of the screen when
you restart. They load into memory at startup time and modify the
standard behavior of the operating system.
Verify INIT Conflict
--------------------
If the Macintosh fails to restart or behaves erratically, you probably
have an incompatible, or conflicting, INIT (also known as a system
extension or control panel). To verify this problem, follow these
steps:
1) Be sure the Caps Lock key is off.
2) Restart, and after you see the picture of a smiling Macintosh, hold
down the Shift key.
3) Release the Shift key when the "Welcome to Macintosh, Extensions
Off" message appears.
4) When the Macintosh is ready, try to recreate the erratic behavior.
If the problem no longer occurs, then you have a conflicting extension
or control panel. Continue with the next section.
Remove and Replace INITs in System Folder
-----------------------------------------
1) Create a new folder on the desktop and name it "INITs."
2) Open the System Folder, Extensions folder, and Control Panels
folder, and choose by Kind from the View menu. Find all items of
Kind "system extension" or "control panel" under the Kind heading in
the windows of the open folders, and move them to the INITs folder.
3) Close the System Folder, and restart the Macintosh.
4) Attempt to recreate the problem.
5) Move one item from the INITs folder to the closed System Folder and
restart the Macintosh.
6) Attempt to recreate the original problem.
Repeat steps 5 and 6 for each item in the INITs folder on the desktop
until the problem recurs. The last item returned to the System Folder
is probably the cause of the problem. Remove it from the System Folder
(restart, holding down the Shift key again, if necessary), and contact
the developer of the INIT for more information.
Final Steps
-----------
Verify that your applications are performing normally. If not, refer
to the application manual or contact the vendor.
When the Macintosh behaves as expected, drag the Storage folder to the
Trash, and choose Empty Trash from the Special menu.
Article Change History:
02 Jul 1994 - Removcd Fax Information
01 Nov 1994 - Modified process for disabling old system folder.
04 Aug 1994 - Verified against contents of the fax document.
Support Information Services