Pin # Signal Description
----- ------ -----------
1 /DATA STROBE Strobe for input data, minimum pulse width is 1 �?second
2 Data1 Data Input bit 1
3 Data2 Data Input bit 2
4 Data3 Data Input bit 3
5 Data4 Data Input bit 4
6 Data5 Data Input bit 5
7 Data6 Data Input bit 6
8 Data7 Data Input bit 7
9 Data8 Data Input bit 8
10 /ACKNOWLEDGE Handshaking output signal; acknowledges receipt of data
╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩and indicates readiness to receive additional data.
11 BUSY Busy output signal; indicates that a /DATA STROBE has
╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩been received, but that /ACKNOWLEDGE has not yet been
╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩given. Signal will be high when receive buffer is full
╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩or printer fault occurs.
12 PAPER ERROR Output status signal. Indicates a paper error.
13 SELECT OUT Not used in the LW Pro 600/630, daisy-chained printer
╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩select signal.
14 AUTO FEED Not used in Postscript printers. Indicates that paper
╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩should be fed automatically.
15 SELECT IN Not used in the LW Pro 600/630, daisy-chained printer
╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩╩select signal.
16 SIGNAL GND Signal ground
17 CHASSIS GND Chassis ground
18 Not used Not used
19-30 SIGNAL GND Signal ground
33-36 Not used Not used