Monitor II PROBLEM/CURE: Picture Rolling



PROBLEM DESCRIPTION: After the Monitor II has had a chance to warm
up, the picture just won't stop rolling.

WARNING: Remember to turn off the Monitor II and unplug it
whenever the case is removed for the procedure below.

CAUSE: 1. Vertical Hold misadjusted
2. Bad electronics module

CURE: 1. Adjust the Vertical Hold (set must be turned on and
operating for this adjustment).
2. If Vertical Hold doesn't fix the problem, replace the
electronics module.

If the above cure doesn't solve your problem refer to the Tech
Procedures to obtain the general troubleshooting procedure for
this product.


Published Date: Feb 19, 2012