If you have lost or changed your CONFIG.SYS or AUTOEXEC.BAT files and want to restore them to their original conditions, edit them to match the following information.
NOTE:
You can also mount your MS-DOS/Windows container and open these files from within the Mac OS. However the application you use to edit these files must be able to save hard carriage returns as carriage return and line feed. The Mac OS normally uses ONLY carriage returns, but MS-DOS requires both carriage returns and line feeds.
CONFIG.SYS
----------
DEVICE=C:\\DOS\\SETVER.EXE
DEVICE=C:\\DOS\\HIMEM.SYS /TESTMEM:OFF
REM If you are using PC Setup 1.0.7, the lines are:
REM DEVICE=C:\\DOS\\EMM386.EXE NOEMS X=C800-CFFF RAM=D000-EFFF
REM or
REM DEVICE=C:\\DOS\\EMM386.EXE X=C800-CFFF RAM=D000-EFFF
REM For PC Setup 1.5, the command lines are:
REM DEVICE=C:\\DOS\\EMM386.EXE NOEMS I=CA00-CBFF X=CC00-CFFF RAM=D000-EFFF
REM or
REM DEVICE=C:\\DOS\\EMM386.EXE I=CA00-CBFF X=CC00-CFFF RAM=D000-EFFF
REM No EMS memory configuration
DEVICE=C:\\DOS\\EMM386.EXE NOEMS I=CA00-CBFF X=CC00-CFFF RAM=D000-EFFF
DOS=HIGH,UMB
FILES=40
STACKS=9,256
LASTDRIVE=M
DEVICE=C:\\Apple\\CDROM.SYS /D:CDDRVR
AUTOEXEC.BAT
------------
@ECHO OFF
C:\\DOS\\SMARTDRV.EXE /X
PROMPT $p$g
PATH C:\\WINDOWS;C:\\DOS
SET TEMP=C:\\DOS
SET SOUND=C:\\SB16
SET BLASTER=A220 I5 D1 H1 T6
LH C:\\SB16\\MIXERSET /P /Q
LH C:\\Apple\\ApplePC
LH C:\\Apple\\MacShare
LH C:\\DOS\\MSCDEX /D:CDDRVR /L:E
LH C:\\Apple\\DOSClip
set tmp=C:\\Temp
rem WIN