Configuration:
- Apple IIe
- Super Serial Card
- CompuCable, P/N MTB0201
- Epson DX-20 Letter Quality Printer
- AppleWorks, version 1.3
Super Serial Card switch settings:
Switch1
| Position | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Closed (On) | - | X | X | x | X | X | X |
| Open (Off) | X | - | - | - | - | - | - |
Switch2
| Position | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Closed (On) | X | - | - | - | X | - | - |
| Open (Off) | - | X | X | X | - | X | X |
Note: Jumper block points to TERMINAL
AppleWorks configuration:
| Description | Begin |
| Needs line feed after each return | NO |
| Accepts top-of-page commands | NO |
| Stop at end of each page | YES or NO
(NO is preferable) |
| Platen width | 13.0 |
Printer codes: Check the printer manual for additional codes:
| Description | Begin | End |
| Characters per inch | no codes |
| Lines per inch | no codes |
| Boldface | Esc W | Esc & |
| Underline | Esc E | Esc R |
| Superscript | Esc D | Esc U |
| Subscript | Esc U | Esc D |
DX-20 switch settings:
Switch1
| Position | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| Closed (On) | - | - | X | - | - | X | - | - |
| Open (Off) | X | X | X | X | X | | X | X |
Switch2
| Position | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| Closed (On) | - | - | - | - | - | - | - | - |
| Open (Off) | X | X | X | X | X | X | X | X |