Apple II Family with Super Serial Card:
Interface:
The Super Serial Card
1 2 3 4 5 6 7 1 2 3 4 5 6 7
ON X X X ON X X
SW1 SW2
OFF X X X X OFF X X X X X
1 2 3 4 5 6 7 1 2 3 4 5 6 7
Jumper block points to terminal.
Cables:
Internal cable from Super Serial Card to back of
machine: 590-0021
Serial Cable from back of machine to printer: 590-0037
Printer Settings*:
8 7 6 5 4 3 2 1
SW 1: X X
X X X X X X
OPEN
SW 2: 4 3 2 1
X X
X X
OPEN
Apple III and III+:
Interface:
Use .Printer Driver and set first byte in Device
Configuration Block to 0E and use printer switch
settings A.(9600 Baud) Or leave the settings in the
Device Configuration Block at the Default values and use
printer settings B. (1200 Baud)
Cables:
Modem Eliminator 590-0029
Straight Through Cable 590-0037
Printer Settings*:
A & B SETTING
8 7 6 5 4 3 2 1
SW 1: X X
X X X X X X
OPEN
A SETTING
SW 2: 4 3 2 1
X X
X X
OPEN
B SETTING:
SW 2: 4 3 2 1
X
X X X
OPEN
Macintosh:
Cables:
Accessory Kit Cable 590-0169
Printer Settings*:
8 7 6 5 4 3 2 1
SW 1: X
X X X X X X X
OPEN
SW 2: 4 3 2 1
X X
X X
OPEN
To Build your own cable:
Mac 1 3 5 7 9
| | | | |
Printer 1 7 3 20 2
Lisa:
Cables:
Modem Eliminator 590-0029
Straight Through Cable 590-0037
Printer Settings*:
8 7 6 5 4 3 2 1
SW 1: X X
X X X X X X
OPEN
SW 2: 4 3 2 1
X X
X X
OPEN
Make sure the preferences are set. Power off the Lisa
so they are saved.
* The diagrams of these switches are presented as seen from the front
of the Imagewriter I printer. The switches are toggle switches;
X marks the toggle.
Article Change History:
25 April 1994 - Corrected Macintosh settings.
Support Information Services