QuickTake 200 users may experience connection issues when initially connecting their QuickTake camera to a Performa 6400. If you have a Performa 6400 with an internal modem, the modem port, on the back of the computer, is covered with a plastic casing which will not let a serial connection be made to this port. The modem port is covered because the it is already dedicated to the internal Modem card installed in the Performa 6400. In this situation the printer port will need to be used. Below are steps you need to take when connecting the QuickTake 200 to the printer port:
1) Choose the Chooser from the Apple Menu
2) Select Inactive for AppleTalk
3) Close the Chooser
Important: If you are connected to an AppleTalk network, you will need to again activate AppleTalk through the Chooser after connecting to a QuickTake 200 camera.