Adding the device driver is a multi-step procedure if you installed AIX 4.1.5 from an update CD.
Step 1
Use the AIX 4.1.4.0 or 4.1.4.1 to install the device software for the adapter.
a) Shut down the server and install the ultrawide adapter.
b) Start the server and mount the install CD on the /mnt directory.
c) Type the following:
cfgmgr -i /mnt/usr/sys/inst.images
If you typed it correctly, you should see a device install using the installp process.
d) type the following:
cd
unmount /mnt
Step 2
Install the update to the drivers from the 4.1.5 CD as follows:
a) Insert and mount the 4.1.5 update CD.
b) Type smitty install_selectable_all
c) Select /mnt as your INPUT device.
d) Press the f4 key to list software to install.
e) Press the / key to search and search for 1000+f
You should have made 2 selections, each ending with .diag and .rte
Press Enter again and the installation should begin.
You can verify the installation by typing
lscfg
You should see the fastwide/ultrawide adapter listed.