To print from an Apple IIe to a Star Micronics Delta 15 printer at 2400 baud,
XON-XOFF handshake, 8-bit data, and 1 stop bit, the switches should be set as
follows:
Super Serial Card
(configuration block set to printer)
Sw-1 Sw-2
1 OPEN CLOSED
2 CLOSED CLOSED
3 OPEN CLOSED for 80 col., OPEN for 132 col.
4 CLOSED OPEN
5 OPEN CLOSED for auto LF, OPEN for no LF
6 CLOSED OPEN
7 CLOSED OPEN
Delta 15 Printer
Sw-2 Sw-3
1 na OPEN
2 CLOSED OPEN
3 na CLOSED
4 na CLOSED
5 na na
6 na CLOSED
7 na OPEN
8 na CLOSED
The cable connecting the SSC and printer should be wired as follows:
SSC Printer
1 1
2 3
3 2
4 -| tie directly to pin 5
5 -| no connection on printer end
7 7
8 not used
19 not used
6 -| tie directly to pin 20
20 -| no connection on printer end
For more information, search under: "Star Micronics"