Removing the I/O card for a Power 100/120

Power Computing provided the information in this article and it was deemed accurate as of 14 November 1997. Apple Computer, Inc. is not responsible for its content. This article is being provided as is and will not be updated in the future.

How to remove he I/O card in a Power 100/120
I/O Card Removal

1. Locate the I/O card. It is installed perpendicular to the logic board in a long brown slot located in the center of the machine.

2. Disconnect all cables from the I/O card.

3. Pull the I/O card straight away from the logic board. It may be necessary to wiggle the card back and forth until it is far enough out of the slot to pull out as the card is held in by a tight pressure fit connector.

Machines Affected: All
Published Date: Feb 19, 2012