AppleShare PC 2.0: Token Ring Card Memory Location Solution



Problem:

I tried installing AppleShare PC 2.0 on a PS 2 Model 60. The model 60 has 5MB
RAM with a 40MB hard drive. Slots 1 and 2 are empty, slot 3 has an extended
memory card, slot 4 has a MicroChannel Adapter A Token Ring card (16/4), slot 5
is empty, and slot 6 has an IRMA board.

The problem is that we are getting the "Mem 2 not matching board" error. We
have tried many different memory configurations, and the results are always the
same. I cannot get a match. What's the problem?

This error message, along with the description of the system, suggests that you
may not have configured the Token Ring card. Configure the card using the IBM
Reference Disk, prior to installing AppleShare PC.

Check to see if the files on other disks that may have shipped with the Token
Ring card are already contained on the Reference Disk. If not, copy them to
the Reference Disk. Make a note of the parameter settings for the card,
particularly the memory locations you assigned. You'll need these later, when
you install the AppleShare PC software. Start up your PC with the Reference
Disk and install and configure the Token Ring card.


Published Date: Feb 18, 2012