MacDraw II and MacDraw Pro drawings with arcs may print incorrectly to a StyleWriter or LaserWriter LS. The printout may contain "phantom" extra arcs that do not exist in the drawing. These phantom arcs look as if their center points are the same as the drawn arcs. This appears to be an issue with the print drivers, as these same arcs print incorrectly from Canvas and SuperPaint as well. To reproduce the issue:
1- draw one or more circular arcs, with a 4¡ arc, from 268¡ to 272¡
2- print to a StyleWriter or LaserWriter LS
However, a 4¡ arc from 266¡ to 270¡ prints correctly.