Issue: Printing reduced from Claris CAD 2.0v3 to a LaserWriter Pro. If you set the reduction in Page Setup to anything less than 60%, when you click OK to exit Page Setup, you'll get an 'out of range' error message. Whatever number you had entered as a reduction percentage will be changed to 60%. (This problem has been reported for MacDraw Pro and MacDraw II also).
Workaround #1: Move or delete the LaserWriter Preferences file from the Preferences folder inside the System Folder. You can then successfully print from Claris CAD reduced at <60%.
Workaround #2: In the Chooser, click the LaserWriter icon, then select any LaserWriter except the LaserWriter Pro printer (a LaserWriter NT or IIf, for example). Click the Setup button. You can then successfully print from Claris CAD reduced at <60%.