We don't have a utility specifically designed to copy or back up font info stored on LaserWriter hard disks, but you can clone the disk under A/UX.
* Connect two drives of the same size to an A/UX system.
* Set the SCSI address of the source drive to 5 and the target drive to 6.
* Boot A/UX and login as root.
* At the command line, type:
# dd if=/dev/dsk/c5d0s31 of=/dev/dsk/c6d0s31 (do not type the #)
The process will take about 1 minute per megabyte of disk space. When it is complete, type:
# sync;sync;sync
Log out and shut down the system. Re-connect the disk to the LaserWriter, power-up and print.
Article Change History:
07 Nov 1994 - Reviewed for technical accuracy.
Support Information Services