A version of this driver is on the OPENSTEP CD-ROM
An updated release version of this driver, version 4.03, is avaiable on Apple's FTP servers at:
Driver Name / Installer .pkg: Adaptec2940SCSIDriver
Driver Type: SCSI
Driver Scope: Product Family
Supported Components: Adaptec AIC-7850, Adaptec AIC-7870, Adaptec AIC-7870D, Adaptec AIC-7880
PC Bus / Interface Supported by Driver*: Integrated, PCI
General Overview notes:
The Adaptec 2940 series driver is designed to support the 2940 series of PCI SCSI adapters. A driver for Adaptec 7895 and other drivers, see the Adaptec 78xx Driver Overview, TIL article 70011.
Supported Products / Add-on Adapters:
Adaptec AHA-2930B (PCI)
Adaptec AHA-2940 (PCI)
Adaptec AHA-2940W (PCI, Wide SCSI)
Adaptec AHA-2940U (PCI, Ultra SCSI)
Adaptec AHA-2940UW (PCI, Ultra/Wide SCSI)
Adaptec AHA-2910B (PCI) - Not tested but should work.
Supported Products / Systems (ie integrated into PC System):
DEC EISA/PCI Server system w/ 7870 on motherboard
DEC Celebris GLST w/ 7850 on riserboard
HP Kayak on-board 7860 & 7880 based SCSI adapters.
Special Features of Driver / Driver Notes:
This driver does not support the Adaptec AHA-2920 (PCI)
SCSI Driver Details
Supported Connectors: 50-pin Header (Internal SCSI), 50-pin High Density (SCSI-2), 68-pin High Density (Wide SCSI)
Access Mode: Bus Master DMA
Attributes*: SCSI-2
Cache Size Supported*: N/A
Known Problems
The Adaptec 2940 SCSI Host Adapter Driver supports Synchronous Data Transfer as well as Fast SCSI transfers. In order to enable Synchronous Data Transfer, this feature must be enabled in both the 2940's AutoSCSI program and in the NEXTSTEP Configure application, when configuring the Adaptec 2940 driver. In the AutoSCSI program, this feature is enabled in the SCSI Device Configuration menu, via the Initiate Sync Negotiation field. This can be enabled or disabled on a per-target basis. In the Configure application, the Synchronous button, if disabled, disables Synchronous Transfers for ALL targets. If enabled, the values selected in the AutoSCSI program are used to determine whether or not Synchronous Transfers occur on a per-target basis.
The Synchronous Transfer data rate is determined in the 2940's AutoSCSI program, via the Maximum Sync Transfer Rate field in the SCSI Device Configuration menu. Fast SCSI Transfers are enabled by selecting a value of 10 (i.e., 10 Megabytes/seconds) for this field. Note that if Synchronous Transfers are disabled, the Maximum Sync Transfer Rate field is meaningless. Also note that it is not recommended to select a value higher than 5 for a device which is in an external enclosure and connected to the 2940 via an external SCSI cable.
Driver Version Notes
3.33 - Added support for Adaptec's AIC-7850 chipset.
3.36 - Added support for Adaptec's AIC-7870 revision D (needed to support the latest revisions of the AHA2940 & AHA2940W)
3.37 - Integrate Adaptec's HIM v1.21 to support the AHA2940U & AHA2940UW Ultra SCSI host adapters.
4.00 - Released on OPENSTEP 4.0 User CD-ROM
4.02 - Fixes a bug which prevented adapters with BIOS rev. 1.32 from working on machines with Phoenix BIOS
* - Indicates information that is inclusive of the entire capability of this driver. Not all devices supported by this driver may include all features listed.
Product Vendor
Adaptec Inc.
691 South Milpitas Blvd.
Milpitas, CA 95035
USA
+1 (408) 945 8600 international phone number
+1 (800) 959 7274 USA toll-free (customer support) phone
+1 (408) 945 7727 bulletin board system
+1 (408) 957 7150 faxback system
+1 (408) 262 2533 fax