BEFORE YOU START: Familiarize yourself with the ImageWriter II Technical
Procedures. Be sure to follow proper ESD procedures.
PROBLEM: The carriage motor makes a loud "humming" noise when the carriage
moves to the left side of the printer upon power up. This sometimes occurs
after the printer has been taken apart and reassembled.
CURE: Check to make sure the ground strap from the CPU board to the Driver
PCB is NOT routed around the right side of the motor mount. If the ground
strap gets between the motor mount and the carriage assembly, the left
carriage position sensor never detects the carriage, consequently the motor
stays on as the printer tries to complete the power up sequence. The ground
strap should be positioned between the motor mount and the left side of the
case. If the ground strap is routed correctly see the General
Troubleshooting Procedures for the ImageWriter II.