Magic Slate thinks it is talking to a LaserWriter instead of an ImageWriter II. Because the Apple II Workstation card emulates a Super Serial Card, you should select that interface in the Magic Slate program.
Also, on an Apple IIe, you always have to run Chooser.II before you run an
application and without powering off the computer, see below.
1) Launch your Apple II workstation disk.
2) Choose your printer.
3) Quit Chooser.II, but DO NOT power off.
4) Launch Magic Slate by ProDOS pathname. For example, -/volumename/application name.
5) Configure Magic Slate to print to an ImageWriter at the slot that contains the workstation card.
If this doesn't work, perhaps Magic Slate is not flexible in the slot location or is clearing the Chooser.II info on launch.
Article Change History:
18 Nov 1996 - Reviewed for technical accuracy, revised formatting.