Step 1
------
Make sure that the ImageWriter I printer's switch settings are
correct:
Switch 1
1-Off
2-Off
3-Off
4-Off
5-Off
6-On
7-Off
8-Off
Switch 2
1-ON
2-ON
3-OFF
4-XX
Step 2
------
Verify that you are using the correct cable. Cable part number 590-0555, or the original Macintosh to ImageWriter DB-9 to DB-25 cable (part # 590-0169) with the DB-9 to Mini DIN 8 Macintosh Peripheral Adapter cable (part # 590-0553) can be used.
Step 3
------
From the Chooser, verify the following:
- ImageWriter driver is selected
- AppleTalk is off
- The correct port is selected
If this does not work, you may want to start looking for hardware failures:
Try the ImageWriter on another computer, then try another printer with your
computer.
Article Change History:
05 Feb 1996 - Added additional cable information.
Support Information Services